For merchants and installers in Great Britain

Hot water, heated by the air.

The ENTH-200 and ENTH-250 are hot water cylinders with a small heat pump on top, made by TCL. enthalvia supplies them in Great Britain through merchant and installer partners, with 24 months of cover on every unit.

  • 204 L / 250 LTwo capacities
  • 70°CFrom the heat pump alone
  • R290, GWP 3Natural refrigerant
  • 24 monthsCover on every unit
ENTH heat pump water heater, illustrated A drawing of the unit that changes as you read: it grows from the ENTH-200 to the taller ENTH-250, opens to show the heat pump on top, heats the water in the tank to 70°C, then closes and shows its WiFi, SG-Ready and Modbus connections. Simplified, not to scale. 1,802 mm 600 × 625 mm footprint 12°C Room air inCooler air out R290 heat pump150 g charge, GWP 3 Enamelled steel tankMagnesium anode Back-up element1,600 W, to 75°C Hot water outCold mains in WiFi and appOver-the-air updatesSG-ReadyModbus

How it works

A heat pump and a hot water cylinder, in one unit.

A small heat pump on top of the tank draws in air, moves heat from it into the stored water, and releases the cooler air. The unit stands indoors.

01 / 04

Two sizes, one footprint.

The ENTH-200 holds 204 litres and the ENTH-250 holds 250. Both stand on the same 600 × 625 mm footprint.

Capacity204 L
Height1,802 mm
Net weight94 kg

ENTH-200: 204 litres, 1,802 mm high, 94 kg net. ENTH-250: 250 litres, 2,022 mm high, 106 kg net.

02 / 04

Heat from the air. Hot water for your home.

The heat pump uses heat in the air to warm the water in the tank. The air leaving it is cooler. Your installer can use room air or suitable ducting to outside. The heat pump operates between −7°C and +43°C.

R290 refrigerant150 g chargeGlobal warming potential of 3850 W maximum heat pump input

03 / 04

70°C from the heat pump alone.

The heat pump heats the stored water to 70°C on its own. The 1,600 W back-up element takes it to 75°C.

Enamelled steel tankMagnesium anode, electronic anode optionalRated pressure 0.85 MPa

04 / 04

WiFi built in, with open interfaces.

WiFi and the TCL Home app, with over-the-air updates. SG-Ready and Modbus interfaces for connected energy systems.

Full specification
The unit standing beside kitchen cabinets in a bright, modern home
Render: TCL

In the home

One indoor unit. Airflow planned to suit your home.

One unit on a 600 × 625 mm footprint. It needs clear space around it to draw its air, or ducts to outside.

  • 204 L and 250 L
  • 70°C from the heat pump alone
  • R290, GWP 3
  • WiFi and the TCL Home app
  • SG-Ready and Modbus
  • 24 months cover on every unit
  • No registration
  • Made by TCL
  • UK stock point in Bristol

Where it fits

The jobs where a full heat pump system does not fit.

  • 01

    Electric-only cylinders

    Homes heating water on the immersion. A heat pump does the heating instead, with the 1,600 W element kept as back-up.

  • 02

    Off the gas grid

    Homes paying for oil or LPG deliveries to heat their water.

  • 03

    Flats and terraces

    An indoor water heater can be an option where space is limited. Your installer still needs to check airflow, clearances, drainage and any ducting.

Choose your route

Two product lines

Hot water first. Air conditioning next.

The ENTH-200 and ENTH-250 come first, with UK delivery dates to be confirmed. TCL residential split air conditioning is the next range we are preparing for Great Britain.

One app for both. The TCL Home app controls TCL air conditioning and the TCL water heater.

Specification

The figures installers ask for.

Both models side by side, from TCL's product brochure. The full sheets add connections and electrical data.

ENTH-200 and ENTH-250 specification
SpecificationENTH-200ENTH-250
Stated capacity204 L250 L
Coefficient of performanceEN 16147, 7°C air, load profile XL3.303.50
Annual electricityLoad profile XL1,233 kWh1,154 kWh
Heat-up timeHeat pump only, 10 to 50°C, 15°C air6 h7.2 h
Maximum water temperatureHeat pump only / with element70°C / 75°C
Heat pump working rangeAir temperature−7 to +43°C
RefrigerantR290, 150 g, GWP 3
Maximum power inputHeat pump / with element850 W / 2,450 W
Back-up element1,600 W
Sound power53 dB(A)
Sound pressureAt 1 m41 dB
Rated pressureUnvented hot water system0.85 MPa
DimensionsW × D × H600 × 625 × 1,802 mm600 × 625 × 2,022 mm
Net weight94 kg106 kg
TankEnamelled steel, magnesium anode; electronic anode optional
ControlsWiFi, TCL Home app, over-the-air updates, SG-Ready, Modbus
MCSMCS certification pending, expected October 2026
Differs between the two modelsSource: TCL service manual V25.07.11.4 and product fiche; heat-up and sound pressure: TCL, 29 September 2026

Cover

Whole-appliance cover. Clearly explained.

Every unit comes with 24 months of cover from enthalvia on the whole appliance, parts and labour. There is no registration form and cover has no annual service condition. The unit still needs the maintenance specified by TCL. You can extend cover up to six years with enthalvia Care.

Month after installation Month 18

Covered. Included cover: whole appliance, parts and labour.

Choose the cover
  • Whole appliance, parts and labour
  • No registration
  • No annual service condition

Drag along the line, or pick a level of cover. Terms, transfer conditions and parts availability apply. Priority allocation is not a guaranteed repair time. Routine maintenance is still needed. enthalvia Care is sold through partner merchants and installers, who set their own price. Ask for the full cover terms with your quotation and before you buy.

About enthalvia Care

Buying options

Choose your cylinder. Choose your cover.

Compare the two water heaters, choose included cover or a Care extension, and request a price for your home or project.

Explore packages & request a price →

The partner offer

We supply the unit, the stock, the parts and the cover. You fit it.

01

Apply

Tell us who you are, what you stock or fit, and where you work.

02

Order

Request your trade price and delivery date. Orders will be supplied through our Bristol stock point when stock is available.

03

Fit

Use a competent unvented hot water installer and follow the local building regulations and TCL instructions. We provide the product cover and parts support.

  • 24 months cover on every unit: whole appliance, parts and labour
  • No registration and no annual service condition
  • enthalvia Care extends cover up to six years for your customer
  • Homeowner enquiries passed to partners where they cover the area

The manufacturer

Made by TCL.

TCL makes the ENTH-200 and ENTH-250, and its name stays on the product. enthalvia imports them and carries the cover, with a UK stock point in Bristol once the first shipment arrives.

About enthalvia and TCL
1981Founded
1070.HKListed in Hong Kong
2ndTV brand globally by 2025 shipments, with a 14.7% share

Share figure: Omdia, as reported by TCL, 27 March 2026.

TCL's manufacturing base in Nansha, Guangzhou. Footage: TCL.

A hot water cylinder with its own heat pump built in.

Fitted by a competent unvented hot water installer, with 24 months of whole-appliance cover. Manufacturer maintenance instructions still apply. Apply now and be ready when the first shipment arrives.